KAL3840

This tool combines a powerful lab scope with a most useful and quick to use scan tool functions with a GMM and DSO.

Do you need a lab scope?
Automotive On-board diagnostic systems of these days have gone a long way toward helping you locate a problem. But those systems aren't perfect and they don't cover everything (most glitches and intermittents). So the real challenge that befuddles most automotive technicians is diagnosing "no-code" trouble.

On-board diagnostic systems are engineered with fairly wide set limits for sensors, actuators, connectors and terminals.

When a component exceeds its limit consistently, a trouble code is generated. But to keep warranty costs in line, tolerances aren't set to catch all transients, even though they can cause some of your worst headaches. As a result, technicians are finding more and more uses for the oscilloscope - next to the multimeter, the most common troubleshooting tool.

Use the DSO to capture a live “signature” of a circuit.
Use the GMM (Graphing Multimeter) to graph trends in the signal.
Use the Code Reader for quick code checks and s I/M Readiness Status to confirm repairs.

The UEI 7103 Automotive Scope/GMM/OBD II Code Reader represents the most powerful and versatile tool available for troubleshooting automotive electronics since we can track down elusive no-code driveability problems as well as diagnose OBD II sensors and components.

• A 25 Mega-sample/Second (one channel minimum) sample rate .

• Lab scope signal patterns.

• True RMS Graphing Multimeter (GMM) measurements and graphs.

• OBD II Code Reader function.

• A unique "Glitch Snare" mode which captures, displays and optionally saves abnormal signal patterns in the Scope mode of the COMPONENT TESTS only when they occur.

• Preset tests that enable the user to check the majority of automotive sensors, actuators and systems easily and quickly.

• Powerful built-in reference information for each preset test which includes a test procedure showing how to connect to the circuit, a normal reference signal pattern, theory of operation and troubleshooting tips.

• Menu-driven interface has automatic configurations for most of non-preset tests, so you will find that the instrument is easy-to-use.

• The Secondary Ignition Single function displays the waveform along with the spark voltage, RPM, burn time and burn voltage.

Scope Mode

• Sample rate 25 Meg per second

• Voltage and Time cursors on each channel

• 48 Pre-set waveforms that include sensor, actuator, electrical and ignition patterns

• DC to 5 MHz Bandwidth

• Sweep rate 1µS to 50 seconds in the scope mode

• “Glitch Snare” mode captures, displays and optionally saves abnormal signal patterns in Scope or Component Test modes

• Secondary Ignition displays the waveform and includes spark voltage, RPM, burn time and burn voltage

• Parade pattern on secondary ignition “Parade” mode • Built in ‘Help’ includes test procedure showing how to connect to the circuit, a sample of the expected waveform, theory of operation and troubleshooting tips

• Optional Diesel accessory to test injector pump timing and RPM

Graphing Multimeter Mode

• TRMS Graphing Multimeter

• 5 seconds to 24 hour sweep rate

• AC / DC Volts

• Ohms, Continuity, Diodes

• Frequency, Duty Cycle, Dwell

• Ignition Peak and Burn Volts, Ignition Burn Time

• Amps (with optional adapter)

• Temperature (with optional adapter)


OBDII Code Reader

• Active and Pending Codes

• Generic and Manufacture Specific Definitions (GM, Ford, Chrysler, Toyota and Honda)

• I/M Readiness Monitor Status Indication

• Erase DTC’s (diagnostic trouble codes) and reset MIL capability

• USB Interface easily supports future updates (software sold seperately)

• NOTE: This unit is not CAN compatibile!

Contents

• 1 ADL7103 Automotive Scope

• 1 AC/DC Power Adapter / Battery Charger

• 2 Shielded test leads (red & yellow)

• 2 Grounded leads for shielded leads

• 3 Alligator clips (red, yellow, & black)

• 3 Back probe pins (red, yellow, & black)

• 1 Secondary Pick up

• 1 Ground lead for capacitive secondary probe (black)

• 1 Inductive pick up

• 1 OBDII Code reader cable

• 1 User manual

• 1 Soft carrying case